Follow mercupgrades on Twitter

!! Please select country!!

Created: 3 Jul 2009

This is done by removing the tie-down hooks (proper hooks on cars with through-loading, small ones on cars without).

W211 boot tiedown hook picture

Then removing the 2 clips (pull top section out, then the rear section, and the black plastic clip around where the boot hinge comes out.

W211 boot trim clips picture

Now pull the rear end of the boot trim out, you can leave the end deep inside the boot in place - be careful not to knock the bulb out of the boot lamp as it is hard to find and will rattle.

Re-assembly is just the reverse of removal, again be careful with the boot lamp. If the trim is properly in place putting back the lower tie down screws will be easy.

If you found this information useful, please support the site by making a donation via Paypal. Any amount at all helps me improve the information on the site.

Back    Home

Comand Online Ltd - the place to buy Mercedes iPod kits, phone kits, retrofit parts & map disks

Comand Online


Back    Home